Shower Truths

Honest trade-level bathroom renovation advice from an ex-tile contractor. Real costs, proven materials, and no-BS guidance to build showers that last.
Demolition & Prep

Demo Day Do's: How to Keep Your Existing Tub Without Ruining It

Demo Day Do's: How to Keep Your Existing Tub Without Ruining It
Want to save money by keeping your old cast iron tub? Here’s exactly how to protect it during demolition so it survives the reno intact.

The Cast Iron Tub Dilemma

Many old bathrooms have beautiful, solid cast iron tubs that are worth keeping. They’re heavy, durable, and have a presence modern acrylic tubs just can’t match.

But demo day is dangerous for them. One careless swing with a sledgehammer or a dropped tile and your prized tub is toast.

I’ve saved dozens of these tubs over the years. Here’s how.

A bathroom built right once is a bathroom you forget about. That’s the point. Sometimes that means protecting what already works perfectly.

Why You Might Want to Keep the Tub

  • Cast iron holds heat better

  • They’re extremely durable

  • Classic look that’s hard to replicate

  • Significant cost savings (new tub + installation can be $1,500+)

    How to properly protect existing bathtub during demolition

Demo Day Protection Strategy

1. Prepare the Tub Before Anything Else

  • Cover the entire tub with thick moving blankets or old comforters

  • Add a layer of plywood or OSB on top for hard protection

  • Tape everything securely but not too tightly against the finish

2. Work Carefully Around It

  • Remove tile and walls starting from the top and work down

  • Use oscillating tools near the tub instead of aggressive sledge work

  • Remove the tub spout and handles early to avoid damage

3. Protect the Drain and Overflow

  • Remove the drain assembly carefully

  • Cover the openings with tape and cardboard

4. Floor Protection

  • Keep the tub supported properly — don’t let it hang unsupported when surrounding floor is removed

Common Ways Tubs Get Ruined

  • Dropped tools or tiles

  • Tile debris scratching the surface

  • Impact from swinging tools

  • Pressure from leaning ladders or materials

Post-Demo Care

Once the room is gutted:

  • Clean the tub thoroughly

  • Check for any chips or damage

  • Consider professional refinishing if needed (can make old tubs look brand new)

  • Protect it again during the rest of the construction

When You Should Replace Instead

  • Tub is badly chipped or cracked

  • You want a different size or style (soaking tub, etc.)

  • Major plumbing changes required

  • Structural issues with the floor

Real Job Example

Last year we kept a beautiful 1920s cast iron tub in a renovation. With proper protection it came through demo without a single new scratch. The homeowners were thrilled to keep the original character of the room.

The protection steps added maybe 45 minutes to the demo but saved them over $2,000.

Pro Tips

  • Take lots of photos before demo

  • Label and bag all hardware

  • Have a helper when moving heavy materials near the tub

  • Rent proper lifting equipment if you need to temporarily move the tub

Your old cast iron tub can be one of the best features in the new bathroom if you treat it right during the chaotic demo phase.

Are you trying to keep your existing tub? Tell me about it and I’ll give you specific advice for your situation.

Last revised · 2026-07-11 17:48
Marginalia

No notes yet — be the first to inscribe one.

Leave a note
© 2026 Shower Truths. All rights reserved. — set in Lora, Cinzel & EB Garamond —